Alkyd(ali or aro)	2-can Epoxy	Acrylic Latex	Linseed oil	Phenolic	Chlorinated Rubber	Aliphatic Urethane	Vinyl
Solvents	aliphatic or Aromatic	Lacquer	Water	Aliphatic	Aromatic	Aromatic	Lacquer	Lacquer
Min. Surface Preparation*	SP3	SP6	SP6	SP2	SP6	SP6	***	SP6
Stability During Use	EX	F	EX	EX	EX	EX	F	EX
Brush ability	G	F	EX	VG	G	F	G	P
Method  of  Cure	Oxid.	Chem.	Coal	Oxid.	Oxid.	Evap.	Chem.	Evap.
Speed  of  Cure      (50-90ºF)	G	G	EX	F	G	EX	EX	EX
Speed  of  Cure      (35-50ºF)	F	NR	NR	P	F	G	G	G
Film Build per Coat	G	VG	F	G	G	G	VG	G
Use on Primer	G	EX	F	EX	G	G	G	G
Use on Damp  Surface	P	G	VG	P	P	P	G	G

EX  Excellent   G      Good       VG  Very good            F       Fair                     P       Poor NR   Not Recommended	Lacquer = Aromatic plus ketone , or ether solvent Aliphatic = Mineral Sprit                      Aromatic = Xylene, Toluene,etc
* SSPC  ** Painting Should not be done above 90ºF or below 34ºF *** Usually used in top coats

	Alkyd(ali or aro)	2-can Epoxy	Acrylic Latex	Linseed oil	Phenolic	Chlorinated Rubber	Aliphatic Urethane	Vinyl
Solvents	aliphatic or Aromatic	Lacquer	Water	Aliphatic	Aromatic	Aromatic	Lacquer	Lacquer
Min. Surface Preparation*	SP3	SP6	SP6	SP2	SP6	SP6	***	SP6
Stability During Use	EX	F	EX	EX	EX	EX	F	EX
Brush ability	G	F	EX	VG	G	F	G	P
Method  of  Cure	Oxid.	Chem.	Coal	Oxid.	Oxid.	Evap.	Chem.	Evap.
Speed  of  Cure      (50-90ºF)	G	G	EX	F	G	EX	EX	EX
Speed  of  Cure      (35-50ºF)	F	NR	NR	P	F	G	G	G
Film Build per Coat	G	VG	F	G	G	G	VG	G
Use on Primer	G	EX	F	EX	G	G	G	G
Use on Damp  Surface	P	G	VG	P	P	P	G	G

EX  Excellent   G      Good       VG  Very good            F       Fair                     P       Poor NR   Not Recommended	Lacquer = Aromatic plus ketone , or ether solvent Aliphatic = Mineral Sprit                      Aromatic = Xylene, Toluene,etc
* SSPC  ** Painting Should not be done above 90ºF or below 34ºF *** Usually used in top coats